Technische Daten (aus Herstellerdokumenten)
| Feld | Wert | Bedingung | Quelle |
|---|---|---|---|
| battery_cable_cross_section | 10 mm² Sicherheitsrelevant | Kabellänge 0–1,5 m | victron_d0026 , Seite 7 |
| battery_cable_cross_section | 16 mm² Sicherheitsrelevant | Kabellänge 1,5–3 m | victron_d0026 , Seite 7 |
| fuse_requirement | bei Batteriekabel > 1,5 m zusätzliche Sicherung oder DC-Schutzschalter nahe der Batterie Sicherheitsrelevant | - | victron_d0026 , Seite 7 |
| internal_fuse | 100 A, 32 V, MIDI; austauschbar Sicherheitsrelevant | - | victron_d0026 , Seite 7 |
| protection_features | Ausgangskurzschluss; Überlast; Batteriespannung zu hoch; Batteriespannung zu niedrig; Übertemperatur; DC-Welligkeit zu hoch Sicherheitsrelevant | - | victron_d0007 , Seite 2 |
| safety_class | Schutzklasse I – Gehäuse muss geerdet werden; AC-Ausgang isoliert vom DC-Eingang und Gehäuse (außer mit Ground-Relay) Sicherheitsrelevant | - | victron_d0026 , Seite 3 |
| terminal_wire_size_max | 25 mm² Sicherheitsrelevant | Batteriekabel; 24-V-Modell | victron_d0007 , Seite 2 |
| ac_outlet_type | Schuko (CEE 7/4), IEC-320, UK (BS 1363) oder AU/NZ (AS/NZS 3112) je Artikelnummer | - | victron_d0007 , Seite 2 |
| ac_output_frequency | 50 Hz | ± 0,1 %; auf 60 Hz einstellbar | victron_d0007 , Seite 2 |
| ac_output_voltage | 230 V | ± 3 % | victron_d0007 , Seite 2 |
| battery_charged_detect_voltage | 28 V | einstellbar | victron_d0007 , Seite 2 |
| battery_terminal_type | Schraubklemmen | - | victron_d0007 , Seite 2 |
| continuous_output_power | 1150 W | bei 25 °C | victron_d0007 , Seite 2 |
| continuous_output_power | 1000 W | bei 40 °C | victron_d0007 , Seite 2 |
| dc_input_voltage_max | 34 V | - | victron_d0007 , Seite 2 |
| dc_input_voltage_min | 18,4 V | - | victron_d0007 , Seite 2 |
| dc_low_restart_voltage | 21,8 V | einstellbar | victron_d0007 , Seite 2 |
| dc_low_shutdown_voltage | 18,6 V | einstellbar; zusätzlich dynamische lastabhängige Abschaltung | victron_d0007 , Seite 2 |
| derating | 1,25 % je °C über 40 °C | - | victron_d0007 , Seite 2 |
| efficiency_peak | 91 % | 24-V-Modell | victron_d0007 , Seite 2 |
| humidity_max | 95 % | nicht kondensierend | victron_d0007 , Seite 2 |
| ingress_protection | IP21 | - | victron_d0007 , Seite 2 |
| mounting_orientation | senkrecht mit Lüfter unten oder waagerecht an der Wand empfohlen (dann IP20); nicht senkrecht mit Lüfter oben | - | victron_d0026 , Seite 6 |
| operating_temperature_max | 65 °C | lüfterunterstützte Kühlung | victron_d0007 , Seite 2 |
| operating_temperature_min | -40 °C | lüfterunterstützte Kühlung | victron_d0007 , Seite 2 |
| peak_power | 1600 W | für 15 s | victron_d0007 , Seite 2 |
| remote_on_off | ja | - | victron_d0007 , Seite 2 |
| safety_standards | EN-IEC 60335-1; EN-IEC 62109-1 | - | victron_d0007 , Seite 2 |
| time_limited_power | 1200 W | für 1 h (Kaltstart) | victron_d0007 , Seite 2 |
| vehicle_approval | ECE R10-4 | - | victron_d0007 , Seite 2 |
| weight | 7,2 kg | - | victron_d0007 , Seite 2 |
| zero_load_power | 11 W | Normalbetrieb | victron_d0007 , Seite 2 |
| zero_load_power | 2 W | ECO-Modus (Standard-Wiederholintervall 2,5 s) | victron_d0007 , Seite 2 |
Gerätebeziehungen
Filax (automatischer Umschalter) (Baureihe, Praxis- und Kombinationswissen)
(Victron Energy)
Typ: netzumschaltung · Schnittstelle: AC · Status: freigegeben
VE.Direct Bluetooth Smart Dongle (Baureihe, Praxis- und Kombinationswissen)
(Victron Energy)
Typ: zubehör_schnittstelle · Schnittstelle: VE.Direct · Protokoll: Bluetooth · Status: freigegeben
BMV-Batteriewächter (allgemein) (Baureihe, Praxis- und Kombinationswissen)
(Victron Energy)
Typ: batterieüberwachung · Status: freigegeben
Einschränkung: Datenblatt nennt 'BMV Battery Monitor' ohne Modell
Einschränkung: Datenblatt nennt 'BMV Battery Monitor' ohne Modell